How to use wlctl command in router?

wlctl

Usage: wlctl [-a|i <adapter>] [-h] [-d|u|x] <command> [arguments]

-h
     this message
-a, -i
     adapter name or number
-d
     signed integer
-u
     unsigned integer
-x
     hexdecimal

ver
     get version information

cmds
     generate a short list of available commands

up
     reinitialize and mark adapter up (operational)

down
     reset and mark adapter down (disabled)

out
     mark adapter down but do not reset hardware(disabled). 
     On dualband cards, cards must be bandlocked before use.

clk
     set board clock state. return error for set_clk attempt if the driver is not down
     0: clock off
     1: clock on

restart
     Restart driver.  Driver must already be down.

reboot
     Reboot platform

ucflags
     Get/Set ucode flags

radio
     Set the radio on or off.
     "on" or "off"

dump
     print driver software state and chip registers to stdout

srdump
     print contents of SPROM to stdout

nvdump
     print nvram variables to stdout

nvset
     set an nvram variable
     name=value (no spaces around '=')

nvget
     get the value of an nvram variable

revinfo
     get hardware revision information

msglevel
     set driver console debugging message bitvector
     type 'wl msglevel ?' for values

PM
     set driver power management mode:
     0: CAM (constantly awake)
     1: PS  (power-save)
     2: FAST PS mode

wake
     set driver power-save mode sleep state:
     0: core-managed
     1: awake

promisc
     set promiscuous mode ethernet address reception
     0 - disable
     1 - enable

monitor
     set monitor mode
     0 - disable
     1 - enable active monitor mode (interface still operates)

frag
     Deprecated. Use fragthresh.

rts
     Deprecated. Use rtsthresh.

cwmin
     Set the cwmin.  (integer [1, 255])

cwmax
     Set the cwmax.  (integer [256, 2047])

srl
     Set the short retry limit.  (integer [1, 255])

lrl
     Set the long retry limit.  (integer [1, 255])

rate
     force a fixed rate:
     valid values for 802.11a are (6, 9, 12, 18, 24, 36, 48, 54)
     valid values for 802.11b are (1, 2, 5.5, 11)
     valid values for 802.11g are (1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48, 54)
     -1 (default) means automatically determine the best rate

mrate
     force a fixed multicast rate:
     valid values for 802.11a are (6, 9, 12, 18, 24, 36, 48, 54)
     valid values for 802.11b are (1, 2, 5.5, 11)
     valid values for 802.11g are (1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48, 54)
     -1 (default) means automatically determine the best rate

a_rate
     force a fixed rate for the A PHY:
     valid values for 802.11a are (6, 9, 12, 18, 24, 36, 48, 54)
     -1 (default) means automatically determine the best rate

a_mrate
     force a fixed multicast rate for the A PHY:
     valid values for 802.11a are (6, 9, 12, 18, 24, 36, 48, 54)
     -1 (default) means automatically determine the best rate

bg_rate
     force a fixed rate for the B/G PHY:
     valid values for 802.11b are (1, 2, 5.5, 11)
     valid values for 802.11g are (1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48, 54)
     -1 (default) means automatically determine the best rate

bg_mrate
     force a fixed multicast rate for the B/G PHY:
     valid values for 802.11b are (1, 2, 5.5, 11)
     valid values for 802.11g are (1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48, 54)
     -1 (default) means automatically determine the best rate

infra
     Set Infrastructure mode: 0 (IBSS) or 1 (Infra BSS)

ap
     Set AP mode: 0 (STA) or 1 (AP)

bssid
     Get the BSSID value, error if STA and not associated

channel
     Set the channel:
     valid channels for 802.11b/g (2.4GHz band) are 1 through 14
     valid channels for 802.11a  (5 GHz band) are:
          36, 40, 44, 48, 52, 56, 60, 64, 100, 104,
          108, 112, 116, 120, 124, 128, 132, 136,
          140, 149, 153, 157, 161,184, 188, 192,
          196, 200, 204, 208, 212, 216

tssi
     Get the tssi value from radio

txpwr
     Set tx power in milliwatts.  Range [1, 84].

txpwr1
     Set tx power in in various units. Choose one of (default: dbm): 
     -d dbm units
     -q quarter dbm units
     -m milliwatt units
Can be combined with:
     -o turn on override to disable regulatory and other limitations
Use wl txpwr -1 to restore defaults

txpathpwr
     Turn the tx path power on or off on 2050 radios

txpwrlimit
     Return current tx power limit

powerindex
     Set the transmit power for A band(0-63).
     -1 - default value

atten
     Set the transmit attenuation for B band. Args: bb radio txctl1.
     auto to revert to automatic control
     manual to supspend automatic control

phyreg
     Get/Set a phy register:
     offset [ value ] [ band ]

radioreg
     Get/Set a radio register:
     offset [ value ] [ band ]

shmem
     Get/Set a shared memory location:
     offset [ value ] [ band ]

macreg
     Get/Set any mac registers(include IHR and SB):
     macreg offset size[2,4] [value] [ band ]

ucantdiv
     Enable/disable ucode antenna diversity (1/0 or on/off)

antdiv
     Set antenna diversity for rx
     0 - force use of antenna 0
     1 - force use of antenna 1
     3 - automatic selection of antenna diversity

txant
     Set the transmit antenna
     0 - force use of antenna 0
     1 - force use of antenna 1
     3 - use the RX antenna selection that was in force during
     the most recently received good PLCP header

plcphdr
     Set the plcp header.
     "long" or "auto" or "debug"

phytype
     Get phy type

scbdump
     print driver scb state to stdout

rateparam
     set driver rate selection tunables
     arg 1: tunable id
     arg 2: tunable value

wepstatus
     Set or Get WEP status
     wepstatus [on|off]

primary_key
     Set or get index of primary key

addwep
     Set an encryption key.  The key must be 5, 13 or 16 bytes long, or
     10, 26, 32, or 64 hex digits long.  The encryption algorithm is
     automatically selected based on the key size. keytype is accepted
     only when key length is 16 bytes/32 hex digits and specifies
     whether AES-OCB or AES-CCM encryption is used. Default is ccm.
     addwep <keyindex> <keydata> [ocb | ccm] [notx] [xx:xx:xx:xx:xx:xx]

rmwep
     Remove the encryption key at the specified key index.

keys
     Prints a list of the current WEP keys

tsc
     Print Tx Sequence Couter for key at specified key index.

wsec_test
     Generate wsec errors
     wsec_test <test_type> <keyindex|xx:xx:xx:xx:xx:xx>
     type 'wl wsec_test ?' for test_types

tkip_countermeasures
     Enable or disable TKIP countermeasures (TKIP-enabled AP only)
     0 - disable
     1 - enable

wsec_restrict
     Drop unencrypted packets if WSEC is enabled
     0 - disable
     1 - enable

eap
     restrict traffic to 802.1X packets until 802.1X authorization succeeds
     0 - disable
     1 - enable

authorize
     restrict traffic to 802.1X packets until 802.1X authorization succeeds

deauthorize
     do not restrict traffic to 802.1X packets until 802.1X authorization succeeds

deauthenticate
     deauthenticate a STA from the AP with optional reason code (AP ONLY)

wsec
     wireless security bit vector
     1 - WEP enabled
     2 - TKIP enabled
     4 - AES enabled
     8 - WSEC in software

auth
     set/get 802.11 authentication type. 0 = OpenSystem, 1= SharedKey

wpa_auth
     Bitvector of WPA authorization modes:
     1
     WPA-NONE
     2
     WPA-802.1X/WPA-Professional
     4
     WPA-PSK/WPA-Personal
     64
     WPA2-802.1X/WPA2-Professional
     128
     WPA2-PSK/WPA2-Personal
     0
     disable WPA

wpa_cap
     set/get 802.11i RSN capabilities

set_pmk
     Set passphrase for PMK in driver-resident supplicant.

scan
     Initiate a scan.
     Default an active scan across all channels for any SSID.
     Optional arg: SSID, the SSID to scan.
     Options:
     -s S, --ssid=S
      SSID to scan
     -t ST, --scan_type=ST
     [active|passive] scan type
     --bss_type=BT
      [bss/infra|ibss/adhoc] bss type to scan
     -b MAC, --bssid=MAC
     particular BSSID MAC address to scan, xx:xx:xx:xx:xx:xx
     -n N, --nprobes=N
     number of probes per scanned channel
     -a N, --active=N
     dwell time per channel for active scanning
     -p N, --passive=N
     dwell time per channel for passive scanning
     -h N, --home=N
      dwell time for the home channel between channel scans
     -c L, --channels=L
     comma or space separated list of channels to scan

passive
     Puts scan engine into passive mode

regulatory
     Get/Set regulatory domain mode (802.11d). Driver must be down.

spect
     Get/Set 802.11h Spectrum Management mode.
     0 - Off
     1 - Loose interpretation of spec - may join non-11h APs
     2 - Strict interpretation of spec - may not join non-11h APs
     3 - Disable 11H and enable 11D

scanresults
     Return results from last scan.

assoc
     Print information about current network association.
     (also known as "status")

status
     Print information about current network association.
     (also known as "assoc")

disassoc
     Disassociate from the current BSS/IBSS.

chanlist
     Deprecated. Use channels.

channels
     Return valid channels for the current settings.

channels_in_country
     Return valid channels for the country specified.
     Arg 1 is the country abbreviation
     Arg 2 is the band(a or b)

curpower
     Return current tx power settings.
     -q (quiet): estimated power only.

txinstpwr
     Return tx power based on instant TSSI 

scansuppress
     Suppress all scans for testing.
     0 - allow scans
     1 - suppress scans

evm
     Start an EVM test on the given channel, or stop EVM test.
     Arg 1 is channel number 1-14, or "off" or 0 to stop the test.
     Arg 2 is optional rate (1, 2, 5.5 or 11)

rateset
     Returns or sets the supported and basic rateset, (b) indicates basic
     With no args, returns the rateset. Args are
     rateset "default" | "all" | <arbitrary rateset>
 
     default - driver defaults
 
     all - all rates are basic rates
 
     arbitrary rateset - list of rates
     List of rates are in Mbps and each rate is optionally followed
     by "(b)" or "b" for a Basic rate. Example: 1(b) 2b 5.5 11
     At least one rate must be Basic for a legal rateset.

roam_trigger
     Set the roam trigger RSSI threshold: roam_trigger [integer [, a/b]] 

roam_delta
     Set the roam candidate qualification delta. roam_delta [integer [, a/b]]

roam_scan_period
     Set the roam candidate qualification delta.  (integer)

suprates
     Returns or sets the 11g override for the supported rateset
     With no args, returns the rateset. Args are a list of rates,
     or 0 or -1 to specify an empty rateset to clear the override.
     List of rates are in Mbps, example: 1 2 5.5 11

scan_channel_time
     Get/Set scan channel time

scan_unassoc_time
     Get/Set unassociated scan channel dwell time

scan_home_time
     Get/Set scan home channel dwell time

scan_passive_time
     Get/Set passive scan channel dwell time

scan_nprobes
     Get/Set scan parameter for number of probes to use per channel scanned

prb_resp_timeout
     Get/Set probe response timeout

channel_qa
     Get last channel quality measurment

channel_qa_start
     Start a channel quality measurment

country
     Select Country code for use with 802.11d
     Use either long name or abbreviation from ISO 3166.
     Use 'wl country list [band(a or b)]' for the list of supported countries

locale
     OBSOLETE: use "wl country"
     Select the country:
     Worldwide
     Thailand
     Israel
     Jordan
     China
     Japan
     USA/Canada/ANZ
     Europe
     USAlow
     JapanHigh
     All

join
     Join a specified network SSID.
     Join syntax is: join <ssid> [key xxxxx] [imode bss|ibss] [amode open|shared|wpa|wpapsk|wpa2|wpa2psk|wpanone]

ssid
     Set or get a configuration's SSID.
     wl ssid [-C num]|[--cfg=num] [<ssid>]
     If the configuration index 'num' is not given, configuraion #0 is assumed and
     setting will initiate an assoication attempt if in infrastructure mode,
     or join/creation of an IBSS if in IBSS mode,
     or creation of a BSS if in AP mode.

mac
     Set or get the list of source MAC address matches.
     wl mac xx:xx:xx:xx:xx:xx [xx:xx:xx:xx:xx:xx ...]
     To Clear the list: wl mac none

macmode
     Set the mode of the MAC list.
     0 - Disable MAC address matching.
     1 - Deny association to stations on the MAC list.
     2 - Allow association to stations on the MAC list.

wds
     Set or get the list of WDS member MAC addresses.
     Set using a space separated list of MAC addresses.
  wl wds xx:xx:xx:xx:xx:xx [xx:xx:xx:xx:xx:xx ...]

lazywds
     Set or get "lazy" WDS mode (dynamically grant WDS membership to anyone).

noise
     Get noise (moving average) right after tx in dBm

fqacurcy
     Manufacturing test: set frequency accuracy mode.
     freqacuracy syntax is: fqacurcy <channel>
     Arg is channel number 1-14, or 0 to stop the test.

crsuprs
     Manufacturing test: set carrier suppression mode.
     carriersuprs syntax is: crsuprs <channel>
     Arg is channel number 1-14, or 0 to stop the test.

longtrain
     Manufacturing test: set longtraining mode.
     longtrain syntax is: longtrain <channel>
     Arg is A band channel number or 0 to stop the test.

band
     Returns or sets the current band
     auto - auto switch between available bands (default)
     a - force use of 802.11a band
     b - force use of 802.11b band

bands
     Return the list of available 802.11 bands

phylist
     Return the list of available phytypes

shortslot
     Get current 11g Short Slot Timing mode. (0=long, 1=short)

shortslot_override
     Get/Set 11g Short Slot Timing mode override. (-1=auto, 0=long, 1=short)

shortslot_restrict
     Get/Set AP Restriction on associations for 11g Short Slot Timing capable STAs.
     0 - Do not restrict association based on ShortSlot capability
     1 - Restrict association to STAs with ShortSlot capability

ignore_bcns
     AP only (G mode): Check for beacons without NONERP element (0=Examine beacons, 1=Ignore beacons)

pktcnt
     Get the summary of good and bad packets.

upgrade
     Upgrade the firmware on an embedded device

gmode
     Set the 54g Mode (LegacyB|Auto||GOnly|BDeferred|Performance|LRS)

gmode_protection
     Get G protection mode. (0=disabled, 1=enabled)

gmode_protection_control
     Get/Set 11g protection mode control alg. (0=always off, 1=monitor local association, 2=monitor overlapping BSS)

gmode_protection_cts
     Get/Set 11g protection type to CTS (0=disable, 1=enable)

gmode_protection_override
     Get/Set 11g protection mode override. (-1=auto, 0=disable, 1=enable)

legacy_erp
     Get/Set 11g legacy ERP inclusion (0=disable, 1=enable)

scb_timeout
     AP only: inactivity timeout value for authenticated stas

assoclist
     AP only: Get the list of associated MAC addresses.

rssi
     Get the current RSSI val, for an AP you must specify the mac addr of the STA

isup
     Get driver operational state (0=down, 1=up)

fasttimer
     Deprecated. Use fast_timer.

slowtimer
     Deprecated. Use slow_timer.

glacialtimer
     Deprecated. Use glacial_timer.

radar
     Enable/Disable radar

radarargs
     Get/Set Radar parameters in 
     order as npulses, ncontig, min_pw , max_pw, thresh0, thresh1

dfs_status
     Get dfs status

interference
     Get/Set interference mitigation mode. Choices are:
     0 = none
     1 = non wlan
     2 = wlan manual
     3 = wlan automatic

aciargs
     Get/Set various aci tuning parameters.  Choices are:
     enter:
     CRS glitch trigger level to start detecting ACI
     exit:
     CRS glitch trigger level to exit ACI mode
     glitch
     Seconds interval between ACI scans when glitchcount is continuously high
     spin:
     Num microsecs to delay between rssi samples
     Usage: wl aciargs [enter x][exit x][spin x][glitch x]

frameburst
     Disable/Enable frameburst mode

pwr_percent
     Get/Set power output percentage

wet
     Get/Set wireless ethernet bridging mode

bi
     Get/Set the beacon period (bi=beacon interval)

dtim
     Get/Set DTIM

wds_remote_mac
     Get WDS link remote endpoint's MAC address

wds_wpa_role_old
     Get WDS link local endpoint's WPA role (old)

wds_wpa_role
     Get/Set WDS link local endpoint's WPA role

authe_sta_list
     Get authenticated sta mac address list

autho_sta_list
     Get authorized sta mac address list

measure_req
     Send an 802.11h measurement request.
     Usage: wl measure_req <type> <target MAC addr>
     Measurement types are: TPC, Basic, CCA, RPI
     Target MAC addr format is xx:xx:xx:xx:xx:xx

quiet
     Send an 802.11h quiet command.
     Usage: wl quiet <TBTTs until start>, <duration (in TUs)>, <offset (in TUs)>

csa
     Send an 802.11h channel switch anouncement
     Usage wl csa <mode> <when (in TBTTs)> <channel>

constraint
     Send an 802.11h Power Constraint IE
     Usage: wl constraint 1-255 db

rm_req
     Request a radio measurement of type basic, cca, or rpi
     specify a series of measurement types each followed by options.
     example: wl rm_req cca -c 1 -d 50 cca -c 6 cca -c 11
     Options:
     -t n  numeric token id for measurement set or measurement
     -c n  channel
     -d n  duration in TUs (1024 us)
     -p    parallel flag, measurement starts at the same time as previous

     Each measurement specified uses the same channel and duration as the
     previous unless a new channel or duration is specified.

rm_rep
     Get current radio measurement report

join_pref
     Set/Get join target preferences.

assoc_pref
     Set/Get association preference.
Usage: wl assoc_pref [auto|a|b|g]

wme
     Set WME (Wireless Multimedia Extensions) mode (0=off, 1=on, -1=auto)

wme_ac
     wl wme_ac sta/ap [be, bk, vi, vo] [ecwmax, ecwmin, txop, aifsn, acm] value

wme_apsd
     Set APSD (Automatic Power Save Delivery) mode on AP (0=off, 1=on)

wme_apsd_sta
     Set APSD parameters on STA. Driver must be down.
Usage: wl wme_apsd_sta <max_sp_len> <be> <bk> <vi> <vo>
   <max_sp_len>: number of frames per USP: 0 (all), 2, 4, or 6
   <xx>: value 0 to disable, 1 to enable U-APSD per AC

wme_dp
     Set AC queue discard policy.
Usage: wl wme_dp <be> <bk> <vi> <vo>
   <xx>: value 0 for newest-first, 1 for oldest-first

wme_counters
     print WMM stats

reinit
     Reinitialize device

sta_info
     wl sta_info <xx:xx:xx:xx:xx:xx>

cap
     driver capabilities

malloc_dump
     debug malloc info

chan_info
     channel info

add_ie
     Add a vendor proprietary IE to 802.11 management packets
Usage: wl add_ie <pktflag> length OUI hexdata
<pktflag>: Bit 0 - Beacons
           Bit 1 - Probe Rsp
           Bit 2 - Assoc/Reassoc Rsp
           Bit 3 - Auth Rsp
Example: wl add_ie 3 10 00:90:4C 0101050c121a03
         to add this IE to beacons and probe responses

del_ie
     Delete a vendor proprietary IE from 802.11 management packets
Usage: wl del_ie <pktflag> length OUI hexdata
<pktflag>: Bit 0 - Beacons
           Bit 1 - Probe Rsp
           Bit 2 - Assoc/Reassoc Rsp
           Bit 3 - Auth Rsp
Example: wl del_ie 3 10 00:90:4C 0101050c121a03

list_ie
     Dump the list of vendor proprietary IEs

rand
     Get a 2-byte Random Number from the MAC's PRNG
Usage: wl rand

nvotpw
     Write nvram to on-chip otp
Usage: wl nvotpw file

bcmerrorstr
     errorstring

freqtrack
     Set Frequency Tracking Mode (0=Auto, 1=On, 2=OFF)

eventing
     set/get 128-bit hex filter bitmask for MAC event reporting up to application layer

event_msgs
     set/get 128-bit hex filter bitmask for MAC event reporting via packet indications

counters
     Return driver counter values

assoc_info
     Returns the assoc req and resp information [STA only]

autochannel
     auto channel selection: 
     1 to issue a channel scanning;
     2 to set channel based on the channel scanning result;
     without argument to only show the channel selected; 
     ssid must set to null before this process, RF must be up

csscantimer
     auto channel scan timer in minutes (0 to disable)

closed
     hides the network from active scans, 0 or 1.
     0 is open, 1 is hide

pmkid_info
     Returns the pmkid table

abminrate
     get/set afterburner minimum rate threshold

bss
     set/get BSS enabled status: up/down

closednet
     set/get BSS closed network attribute

diag
     diag testindex(1-interrupt, 2-loopback, 3-memory, 4-led); precede by 'wl down' and follow by 'wl up'

reset_d11cnts
     reset 802.11 MIB counters